m
Better formatting.
(Add disk swap info)
m (Better formatting.)
 
Line 1: Line 1:
These adapters are called Percraid on Dell Poweredge servers.  Uses the MegaCLI utility.
These The MegaRAID SAS controllers re called Percraid on Dell Poweredge servers.  They use the MegaCLI utility, which is described here.
== MegaCLI ==
== MegaCLI ==
This to show what virtual disks are present. This describes a system with a pair of 300GB SAS 15k rpm disks holding the OS, an array of four 1TB drives and a pair modern 20TB drives, forming a 300GB OS drive, a 20TB data drive and a 3TB additional storage drive.
This to show what virtual disks are present. This describes a system with a pair of 300GB SAS 15k rpm disks holding the OS, an array of four 1TB drives and a pair modern 20TB drives, forming a 300GB OS drive, a 20TB data drive and a 3TB additional storage drive.
Line 482: Line 482:


Exit Code: 0x00
Exit Code: 0x00
 
</nowiki>
# megacli -PDRbld -ShowProg -PhysDrv[32:5] -a0
=== Check the rebuild ===
You can see how the rebuild is progressing like this:
<nowiki># megacli -PDRbld -ShowProg -PhysDrv[32:5] -a0
                                      
                                      
Rebuild Progress on Device at Enclosure 32, Slot 5 Completed 7% in 8 Minutes.
Rebuild Progress on Device at Enclosure 32, Slot 5 Completed 7% in 8 Minutes.</nowiki>
</nowiki>